RF Microwave Amplifier 0.8 to 4.2 GHz, 50 W
The Amplifier Research 50S1G4A is a solid state, self-contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth,
high gain, and linearity are needed. It is housed in a stylish cabinet designed for benchtop use which can also be removed to allow for rack mounting as well.
The low level of spurious signals and linearity of the Amplifier Research 50S1G4A make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test applications where undistorted modulation envelopes are desired.
At 3 dB compression: 70 W nominal, min. 50 W
At 1 dB compression: 60 W nominal, min. 40 W
Flatness: +/- 1.5 dB typ., max. +/- 2.0 dB
Frequency response: 0.8 – 4.2 GHz instantaneously
Gain (at maximum setting): 47 dB min.
Gain adjustment (continuous range): 10 dB min.(4096 steps remote)
Input impedance: 50 ohms, VSWR 2.0:1 max.
Output impedance: 50 ohms, nominal
Harmonic distortion: -20 dBc max. at 50 W
Spurious: -73 dBc typ.
Phase linearity: +/- 1.0 deg/100 MHz typ.
Modulation capability: AM, FM, or pulse modulation
RF Power: min. 50 W (when used with sweep generator)
Front panel gain control allows the convenience of setting desired output level
RF input leveling circuit:
Controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm
Protects the amplifier from RF input overdrive
Digital display on the front panel
All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232
Bus interface connector on back panel
Local/Remote switch on front panel
RF: Type N female
IEEE-488 (24 pin), RS-232 (9 pin subminiature D)
Dimension (WxHxD): 503 x 249 x 546 mm
Weight: approx. 45 kg
€ 27.000 $34.020 (US)