AC Current Clamp, nominal current range: 5A

Expand the use of your Fluke 430 series power quality tool or ScopeMeter test tool with this 5 A ac current clamp, specially configured to provide good accuracy at low levels e.g. while taking measurements on secondary current transformers.

Low level current clamp measures up to 5 A ac

Compact shape makes transporting and storing convenient; the clamp measures only 116 x 43 x 23 mm (4. 6 x 1.7 x .9 inches)

Take accurate readings without breaking the circuit

CAT III 600 V (For insulated conductors only)

Nominal current range: 5 A

Continuous current range: 10 mA to 6 A

Maximum Non-Destructive Current: 70 A

Lowest measurable current: 10 mA

Basic Accuracy: 48 Hz to 65 Hz, 10 mA to 1 A, 1% + 5 mA, 1 A to 5 A, 1%

Useable frequency: 40 Hz to 5 kHz

Output level(s): 400 mV/A

Input Load Impedance: > 1 MΩ in parallel with up to 47 pF

Crest Factor: ≤ 3, add 0.7% to accuracy

Safety: CAT III 600 V per IEC/EN61010-1, Pollution Degree 2

Maximum voltage: 600 V ac

Output cable length: 2.5 m

€ 298 (net) $358 (US)