PNA-X Microwave Network Analyzer 10MHz-26.5GHz, Opt.: 200 = 2 ports, single source; 080 = Freq. offset measurement; 083 = Vector / scalar calibrated converter measurements; 084 = Embedded LO measure 219 = Add extended power range and bias-ees to 2 port analyzer

World´s widest range of single-connection measurement applications The PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.

(This unit has 26,5 GHz).

Replace racks and stacks:

Reduce your equipment count by replacing racks and stacks of equipment with the PNA-X.

Applications:

S-parameters (CW and pulsed)

Noise figure

Gain compression

Intermodulation and harmonic distortion

Conversion gain/loss

True-differential stimulus

Millimeter-wave

Nonlinear waveform and X-parameter characterization

Antenna test

Bandwidth: 10 MHz - 26,5 GHz

2- or 4-ports with two built-in sources (This unit has 2 ports.)

132 dB system and 130 dB receiver dynamic range, 32,001 points, 32 channels,

5 MHz IF bandwidth

High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB)

Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver

Low noise floor of -114 dBm at 10 Hz IFBW

€ 69 000 (net) $82 800 (US)