Remote Display Automotive Digital Multimeter Kit w/ Removable Display Module
The Fluke 233/A is a Remote Display Automotive Digital Multimeter Kit and allows you to be in two places at once. The removable display solves the problems of holding both the meter and the test leads to make a measurement.
The Fluke 233/A kit works on either conventional or hybrid vehicles.
DC voltage range: 0.1 mV to 1000 V
Accuracy: 0.25% + 2
AC voltage range: 0.1 mV to 1000 V
Accuracy: 1.0% + 3
DC current range: 1 mA to 10 A
Accuracy: 1.0% + 3
AC current range: 1 mA to 10 A
Accuracy 1.5% + 3 Resistance range: 0.1 ohms to 40 Mohms
Counts: 6,000
Capacitance range: 1 nF to 9999 μF
Resolution: 1 nF
Frequency range: 5 Hz to 50 kHz
Resolution: 0.01 Hz
True RMS AC voltage and current for accurate measurements on non-linear signals
Measure up to 1000 V AC and DC
Measure up to 10 A (20 A for 30 s) 10,000 μF capacitance range
Frequency to 50 kHz
Built in thermometer
Resistance, continuity and diode test
Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement. No interference with measurements
Use as a conventional multimeter when the display is connected
Radio transmitter automatically turns off when the display is connected to the meter
Auto power off maximizes battery life
Min/Max and Average recording
Test continuity and diodes
Easy to read display with large digits and bright backlight
Battery life: approx. 400 hours
Safety rating: CAT IV 600 V , CAT III 1000 V
Dimension (HxWxL) 5.3 x 9.3 x 19.3 cm (2.08 x 3.6 x 7.6 inch)
Weight: 604 g (1.3 Ib)
Fluke 233/A remote display multimeter
Test leads
Alligator Clips
Thermocouple probe
Soft carry case
Magnetic meter hanging strap
Automotive backprobe Pins
€ 390 (net) $468 (US)