FieldFox Handheld RF Combination Analyzer, 30kHz-26.5GHz, options: 010 = Vector network analyzer time domain; 030 = Remote control; 112 = Quick cal; 208 = USB power sensor measurements versus frequency; 209 = Extended range transmission analysis; 210 = Vector network analyzer transmission/ reflection; 211 = Vector network analyzer full 2-Port S-parameters; 212= 1-port mixed mode S-parameters; 215= TDR cable measurements; 233= Spectrum analyzer 235 = Preamplifier, 20dB, DANL -155dBm; 236 = Interference analyzer + spectrogram; 238 = Spectrum analyzer time gating; 302= USB power sensor support; 307 = GPS receiver; 308 = Vector voltmeter; 309 = DC bias variable-voltage source; 310 = Built-in power meter, 312 = Channel scanner; 330 = Pulse measurements; 350 = Real-time spectrum analyzer; 351= I/Q analyzer; 355 = Analog demodulation; 356 = Noise figure measurements; 370 = Over the air LTE FDD measurements; 377 = Over the air 5G measurements Unit sold with a valid calibration certificate and with 12 months warranty
The Agilent (now Keysight) N9918A is a Fieldfox Handfeld RF Combination Analyzer with a bandwidth from 30 kHz to 26.5 GHz.
The microwave combination analyzer's base function is a cable and antenna analyzer and it can be configured to include a spectrum and network analyzer. FieldFox can be ordered with additional capabilities: power meter, independent signal generator, vector voltmeter, interference analyzer, variable DC source, built-in GPS receiver, and remote control using an iPad or iPhone.
Cable and antenna analyzer (CAT), vector network analyzer (VNA):
Bandwidth: 30 kHz to 26.5 GHz, useable to 5 kHz
CAT: Distance-to-fault, return loss, cable loss
VNA dynamic range: 100 dB to 9 GHz, 90 dB to 18 GHz
VNA: S11, S21, S22, S12, magnitude and phase
Spectrum analyzer:
Bandwidth: 5 kHz to 26.5 GHz
+/- 0.6 dB amplitude accuracy, full band, over full temperature range of -10 to
+55 °C (14 to 131 °F)
Spur-free dynamic range: ≥ 105 dB
Full-band tracking generator
Independent source, vector voltmeter (VVM), power and pulse measurements:
RF source: 30 kHz to 26.5 GHz, CW, CW coupled, and tracking
VVM: 30 kHz to 26.5 GHz, compare phase and electrical length
Average power, peak power, and pulse characterization with USB power sensors
Built-in power meter: 5 kHz to 26.5 GHz
FieldFox instrument attributes:
Remote control via iPad or iPhone
Battery life: 3.5 hours
Weight: 3.0 kg (6.6 lbs)
Operating temperature: -10 to +55 °C (14 to 131 °F)
€ 33.000 (net) $39.600 (US)