Programmable Power Supply with 2 outputs 0-8V/5A, 0-20V/2.5A, 100W, GPIB and RS-232 Interfaces standard. Unit sold with 36 months manufacturer´s warranty.

Reliable power supply for general purpose applications.

These supplies combine convenient benchtop capabilities with flexible system features in a compact, multi-output package. For bench-only applications, two models are available without I/O interfaces.

Address benchtop and ATE applications with up to three isolated dual-range outputs in a small package

Utilize GPIB and RS-232 interfaces with SCPI command set (drivers available)

Enhance signal integrity in test systems via low-noise outputs

Simplify cabling with built-in measurements

Streamline tasks with front panel control and basic programmable features

Ensure DUT safety with overvoltage protection

Programmable power supply

Outputs: 2

Power: 100 W

Output range:

Range 1: 0 to 8 V / 5 A

Range 2: 0 to 20 V / 2.5 A

Programming Accuracy:

Voltage: < 0.05 % + 10 mV (< 0.1 % + 25 mV for output 2 of E3646/47/48/49A)

Current: < 0.2 % + 10 mA

Ripple & Noise 20 Hz to 20 MHz:

Normal Mode Voltage: < 5 mVpp / 0.5 mVrms

Normal Mode Current: < 4 mArms

Common Mode Current: <1.5 uArms

Readback Accuracy:

Voltage: < 0.05% + 5 mV (< 0.1% + 25 mV for output 2 of E3646/47/48/49A)

Current: < 0.15% + 5 mA (< 0.15% + 10 mA for output 2 of E3646/47/48/49A)

Auto-tracking feature

Constant voltage (CV)

Constqant current (CC)

Overvoltage protection (OVP)

In/out switch for output

Remote sense, connector on rear panel

Front and rear panel outputs

RS232 and GPIB interfaces

LabView, LabWindows and Agilent (now Keysight) VEE driver

Memory for set ups: 5

Dimension (WxHxD): 213 x 133 x 348 mm

Weight: 9,2 kg

€ 1.790 (net) $2.148 (US)