4-Channel Digital Serial Analyzer 16GHz 50GSa/s, 100fs Resolution w/ options: 2XL = 20MSa/Channel; MTH = Mask Testing for Serial Standards up to 4.25Gb/s, incl. Hardware Clock Recovery; PTH = Protocol Triggering / Decode for 8b/10b- encoded Serial Signals up to 3.125Gb/s, incl. Hardware Clock Recovery and Pattern Lock Triggering

ASM =Advanced Event Search / Mark

DJA = DPOJET Jitter / Eye Diagram Analysis

The Tektronix DSA71604B is a Digital Serial Analyzer with a bandwidth of 16 GHz,

4 channels and a member of the DSA70000B series

The DPO70000B and the DSA70000B Series are real-time digital phosphor oscilloscopes and are the industry’s best solution to the challenging signal integrity issues faced by designers verifying, characterizing, debugging, and testing sophisticated electronic designs.

The specialized DSA70000B Series provides a complete and dedicated solution to address the challenges of high-speed serial designs.

Bandwidth: 16 GHz on all 4 channels simultaneously

Sample rate (real-time): up to 50 GSa/s

Record length: up to 250 Megasamples with MultiView Zoom, standard configuration for DSA71604B 20 M on all channels

Rise time (10% to 90%): 24.5 ps

Rise time (20% to 80%): 17 ps

Input coupling: DC (50 ohms), GND

Input impedance: 50 ohms +/- 2%, 1 Mohm with TCA-1MEG adapter

Input sensitivity (18 GHz and below): 10 mV/div to 500 mV/div (100 mV to 5 V full scale)

Vertical resolution: 8 bit (11 bit with averaging)

Max. Input voltage: < 5 V rms for >= 100 mV full scale, also determined by TekConnect accessory

Time base range: 10 ps div to 1000 s/div

Time resolution in ET/IT mode: 100 fs

Jitter noise floor: 300 fs

Fastest waveform capture rate: >300,000 wfms/s max. per channel

Digital serial analyzer models with dedicated configuration for high-speed serial design and compliance testing

Enhanced bandwidth to the probe tip extended to support multiple bandwidth steps for advanced signal integrity

Pinpoint triggering, with over 1400 combinations

Unique serial pattern triggering: up to 3.125 Gbps and 8b/10b standard

Protocol triggering for isolation of pattern-dependent effects and NRZ serial test pattern triggering: up to 6.25 Gbps

Serial data analysis and compliance: PCI Express, Serial ATA, FB-DIMM, SAS, Fiber Channel, IEEE1394b, RapidIO, XAUI, HDMI, DVI, Ethernet, USB 2.0

High-speed serial data link analysis for transmitter channel embed or de-embed and receiver equalization emulation

Most popular jitter, timing, and eye-diagram analysis package

DDR memory bus Analysis

Display: 12.1-in. large XGA Touchscreen

Event search and mark

MyScope custom Windows and right mouse click menus

OpenChoice software with Microsoft Windows XP OS enables built-in networking and extended Analysis

Applications:

Signal integrity, jitter, and timing Analysis

Verification, debug, and characterization of sophisticated designs

Debugging and compliance testing of serial data streams for Telecom and Datacom industry Standards

Investigation of transient phenomena

Spectral Analysis

€ 49.000 (net) $58.800 (US)