3-Phase Power Quality Recorder

The Fluke 1750 is a 3-Phase Power Quality Recorder and record every power quality paramater, every cycle, all the time.

It offers easily record three-phase power quality and monitor for power quality disturbances.

Common Applications:

Long-term analysis: Uncover hard-to-find or intermittent issues; monitor critical equipment, capturing power quality events to correlate with equipment malfunction

Power quality surveys: quantify power quality throughout a facility, documenting results with professional reports

Quality of service compliance: validate incoming power quality at the service entrance

Equipment Installation/Commissioning: Benchmark: power system prior to install to insure quality of Service

Internal memory capacity for data: 2 GB

Maximum recording period: 31 days

Measurement time control: automatic

Power requirements: 100 to 240 V rms +/-10%, 47-63 Hz, 40 W

Voltage and current measurements:

Voltage measurement range:

AC: +/- 1000 V rms + 10% over range

DC: +/- 1000 V + 10% over range

Voltage crest factor: 3 or less

Current measurement range: depends on current probe used

Current crest factor: 4 or less

Measurement types:

One Phase Plus Neutral, One Phase IT No Neutral, One Phase Split Phase, Three Phase Wye, Three Phase Delta, Three Phase IT, Three Phase High Leg, Three Phase Open Leg, 2 Element Delta, 21/2 Element Wye

Input channels Voltage: 4 channels, AC/DC

Current: 5 channels

Voltage channels Input resistance: 2 Mohms

Input capacitance: < 20 pF

Current input characteristics 2 V rms = full scale, 1 Mohms input impedance for ferro CTs, low impedance for Flexi-CTs

Measuring method: Simultaneous digital sampling of voltage and current. Digital PLL synchronized sampling, internal frequency reference used during voltage drops.

All measurements comply with IEC61000-4-30 standards for correct evaluation of all measured values including voltage, current, power, harmonics, flicker etc.

Quick and reliable configuration: ARCHOS 43 Internet Tablet

Threshold-free set up: Apply thresholds after data is collected with Fluke Power Analyze Software

Cross-channel and current triggering capture every measurement, on every channel, every time

Easily analyze data and generate reports with automated EN50160 reporting and compliance

Auto Report creates either standard reports or customized reports with the minimum effort or hassle

Set up in minutes with self-identifying current probes and single-lead voltage connections

No need to reconnect wires: Swap channels internally with the wireless PDA or PC when connections are not correct

Measure parameter: Voltage and current on three phases, neutral, and ground 5 MHz, 8000 Vpk waveform capture: Get a detailed picture of even the shortest events

Quickly retrieve data: With included SD memory card or via the 100 BaseT high-speed Ethernet connection. SD card includes automatic download to SD when no other connection is made to the Instrument

Dimensions: 215 x 310 x 35 mm

Weight: 6.3 kg

€ 8.790 (net) $10.548 (US)