Digital Phosphor Oscilloscope 500MHz, Sampling Rate: 4x5GS/s 4 Channels

The Tektronix DPO7054 is a Digital Phospor Oscilloscope with a bandwith of

500 MHz and 4 channels.

Analog bandwidth (-3 dB): 500 MHz

Number of channels: 4

Rise time: 460 ps (10 % to 90 %), 310 ps (20 % to 80 %)

DC gain accuracy: +/- 1 % with offset/position set to 0

Input coupling: AC, DC, GND

Input impedance (software selectable):

1 Mohm +/- 1 % with 13 pF +/- 2 pF or 50 ohms +/- 1 %

Input sensitivity:

1 Mohm: 1 mV/div to 10 V/div, 50 ohms: 1 mV/div to 1 V/div

Vertical resolution: 8 bit (> 11bit with high resolution)

Input voltage max.:

1 Mohm: +/- 150 V CAT I, derate 20 dB/ decade to 9 V rms above 200 kHz

50 ohms: 5 V rms, with peaks less than +/- 24 V

Position range: +/- 5 divisions

Real time sample rate: Up to 20 GSa/s per 1 channel, 10 GSa/s per 2 channels,

5 GSa/s per 4 channels

Record Length: 50 M per 1 channel, 25 M per 2 channels, 12.5 M per 4 channels standard

Fast waveform capture rate max.: >250,000 wfms/s

User-selectable bandwidth limit filters for better low-frequency measurement accuracy

MyScope custom Windows and right mouse click menus

Event search and mark to find specific events

Pinpoint triggering for the most flexible and highest performance triggering

12.1" XGA display with touch screen

Communications mask testing

Clock recovery from serial data streams

64-bit NRZ serial pattern trigger

Serial protocol triggering and decode: I2C, SPI, RS-232, CAN, LIN, Flexray

MIPI D-PHY, Ethernet, USB 2.0 compliance testing, jitter, timing, eye diagram, power, DDR memory bus analysis, CAN, LIN network design

OpenChoice software with Microsoft Windows XP OS

€ 6 000 (net) $7 200 (US)