Digital Phosphor Oscilloscope 500MHz, Sampling Rate: 4x5GS/s 4 Channels
The Tektronix DPO7054 is a Digital Phospor Oscilloscope with a bandwith of
500 MHz and 4 channels.
Analog bandwidth (-3 dB): 500 MHz
Number of channels: 4
Rise time: 460 ps (10 % to 90 %), 310 ps (20 % to 80 %)
DC gain accuracy: +/- 1 % with offset/position set to 0
Input coupling: AC, DC, GND
Input impedance (software selectable):
1 Mohm +/- 1 % with 13 pF +/- 2 pF or 50 ohms +/- 1 %
Input sensitivity:
1 Mohm: 1 mV/div to 10 V/div, 50 ohms: 1 mV/div to 1 V/div
Vertical resolution: 8 bit (> 11bit with high resolution)
Input voltage max.:
1 Mohm: +/- 150 V CAT I, derate 20 dB/ decade to 9 V rms above 200 kHz
50 ohms: 5 V rms, with peaks less than +/- 24 V
Position range: +/- 5 divisions
Real time sample rate: Up to 20 GSa/s per 1 channel, 10 GSa/s per 2 channels,
5 GSa/s per 4 channels
Record Length: 50 M per 1 channel, 25 M per 2 channels, 12.5 M per 4 channels standard
Fast waveform capture rate max.: >250,000 wfms/s
User-selectable bandwidth limit filters for better low-frequency measurement accuracy
MyScope custom Windows and right mouse click menus
Event search and mark to find specific events
Pinpoint triggering for the most flexible and highest performance triggering
12.1" XGA display with touch screen
Communications mask testing
Clock recovery from serial data streams
64-bit NRZ serial pattern trigger
Serial protocol triggering and decode: I2C, SPI, RS-232, CAN, LIN, Flexray
MIPI D-PHY, Ethernet, USB 2.0 compliance testing, jitter, timing, eye diagram, power, DDR memory bus analysis, CAN, LIN network design
OpenChoice software with Microsoft Windows XP OS
€ 6.000 (net) $7.200 (US)