3-Phase Power Logger, Sample rate: 10.24kHz
The Fluke 1735 is a 3-Phase Power Logger and is a ideal tool for electrician or technician's for conducting energy studies and basic power quality logging.
Set the Power Logger up in seconds with the included flexible current probes and color display. The power quality meter measures most electrical power parameters, harmonics, and captures voltage events.
Designed to measure the most critical three-phase power parameters:
log rms, voltage, rms current, phase angle, voltage events, voltage and current THD, voltage and current, harmonics up to the 50th, active power, reactive power, power factor, active energy, reactive energy, and more
Data memory up to 45 days, for uncover intermittent or hard-to-find issues
Monitor max. power demand over user-defined averaging periods
Efficiency improvements with energy consumption tests
Measure harmonic distortion caused by electronic loads
Improve reliability by capturing voltage dips and swells from load switching
Easily confirm instrument setup with color display of waveforms and trends
Measure all three phases and neutral with included 4 flexible current probes
View graphs and generate reports with included Power Log software
Compact, rugged design with IP65 case, 600 V CAT III
Display: transmissive 1/4 VGA graphic color display, 320 x 240 pixel with additional background lighting and adjustable contrast, text and graphics in color
Memory: 4 MB flash memory, 3.5 MB for measuring data
Interface: RS-232 SUB-D socket; 115.2 k Baud, 8 data bits, no parity, 1 stop bit, firmware updates are possible with RS-232 interface (9-pole extension cable)
Sample rate: 10.24 kHz
Line frequency: 50 Hz or 60 Hz, user-selectable, with automatic synchronization
Power supply: NiMH battery-pack, with ac adatper (15 V to 20 V / 0.8 A)
Battery operation time: 12 hours without backlight, >6 hours with backlight high
Dimension: 240 x 180 x 110 mm
Weight: 1.7 kg, incl. battery
€ 2,120 (net) $2,544 (US)