4-Channel Digital Phosphor Oscilloscope 3.5GHz for Serial/Digital Applications, Options: ASM = Advanced event search and mark; DDRA = Upgrade to DDR technology analysis package; DJA = Advanced jitter and eye analysis tools

The Tektronix DPO7354 is a real time Digital Phosphor Oscilloscope with a

3.5 GHz bandwidth and 4 channels designed for verifying, characterizing, debugging, and testing sophisticated electronic designs and its well suited

for serial and digital applications.

Bandwidth: 3.5 GHz

Input channels: 4

Rise time: 115 ps

Hardware analog bandwidth (-3 dB): 2.5 GHz

Input coupling: AC, DC, GND

Vertical resolution: 8 bit (>11 bit with high resolution)

Max. input voltage:

1 Mohm: +/- 150 V CAT I derate at 20 dB, decade to 9 V rms above 200 kHz

50 ohm: 5 V rms, with peaks less than +/- 24 V

Position range: +/- 5 divisions

Real time sample rate max:

40 GS/s per 1 ch, 20 GS/s per 2 ch, 10 GS/s per 3-4 ch

Max. Record length:

Standard: 50 M/ch / 25 M/2ch / 12.5 M/4ch

Optional up to 500 M/ch / 250 M/2ch / 125 M/4ch

Time base range: 25 ps/div to 1000 s/div

Time resolution (in ET/IT mode): 250 fs

Time base delay time range: 5 ns to 250 ns

Trigger jitter (rms):

1.5 ps rms typ. with enhanced triggering off

< 100 fs rms with enhanced triggering on

Time base accuracy: +/- 2.5 ppm + aging < 1ppm/ year

Acquisition modes (max. fast acquisition mode) waveform capture rate:

>250,000 wfms/s on all 4 channels simultaneously

Signal aquisition

Easy operation

Debugging tools

User selectable bandwidth limit filters

Event search and mark

Pinpoint triggering

12.1" XGA display with touch screen

Communication mask testing

Up to 500 megasample record length with MultiView Zoom, for quick navigation

64 bit NRZ serial pattern trigger for isolation of pattern-dependent effects up to 1.25 Gb/s

Technology-specific software, provides built-in domain expertise: MIPI, D-PHY, Ethernet, USB 2.0 compliance testing, jitter, timing, eye diagram, power , DDR memory bus, analysis, CAN, LIN, and FlexRay network design

Low speed serial protocol triggering and decode: I²C, SPI, RS-232, CAN, LAN, and FlexRay

Applications:

Signal integrity, jitter, and timing analysis

Verification, debugging, and characterizing of sophisticated designs

Debugging and compliance testing of serial data streams

Low speed serial bus design: I²C, SPI, RS-232, CAN, LIN, FlexRay

Power measurement and analysis

Spectral analysis

€ 24,211 (net) $29,053 (US)