High Frequency Current Probe/Current Transformer 200MHz, 36A.

The Tektronix CT1 and CT2 Current Probes are designed for permanent or semi-permanent in-circuit installation. Each probe consists of a current transformer and an interconnecting cable. The current transformers have a small hole through which a current carrying conductor is passed during circuit assembly.

The P6041 Probe Cable provides the connection between the CT1 and CT2 Current Transformers and a BNC oscilloscope input. A 50 Ω termination is required to terminate the cable when connected to a high-impedance (1 MΩ) oscilloscope input. One probe cable can be used to monitor several current transformers that have been wired into a circuit.

High bandwidth

Ultra-low inductance

Very small form factor

Characterize current waveforms

Very low loading of circuit under test

Fits into dense, closely-spaced circuit designs

CT2:

Bandwidth: 1.2 kHz to 200 MHz

Rise time: 500 ps

Sensitivity (into 50 ohms): 1 mV/mA

Accuracy: +/- 3 %

Magnetizing inductance: 7 µH

Leakage inductance: 1 nH

Insertion impedance: 10 MHz: 0.1 ohm, 100 MHz: 0.5 ohm

Max. bare wire size: #16 wire 1.32 mm (0.052in.)

Max. bare wire voltage:

RMS: 175 V RMS CAT I

Peak: 1000 V

DC: 175 V

Max. Peak pulse current: 36 A

Max. continuous current (RMS) 2.5 A

€ 650 (net) $780 (US)